Order CCTV NVR MT100X / CT100X Video/Audio Recording Bundled Service

Components of Cloud CCTV NVR - MT100X / CT100X


  • (1-6) pre-configured wireless day & night IP cameras with motion detection;
  • 1 Pre-configured Wireless-N Access Point delivering superior security, performance and signal strength;
  • 1 NVR PC with Quad-Core Intel Processor delivering more features, better performance and CCTV live-view touch screen.
  • Note: MT100X and CT100X are pre-configured for motion-triggered and continuous video recording, resp.


  • CameraFTP Virtual Security System Software
  • H.264 video/audio recording to the cloud
  • Local live viewing
  • CameraFTP Viewer App for iOS, Android, WP and Windows
  • Browser-based Viewer for Windows and Mac;
  • Live viewing and playback from anywhere;


Unlimited cloud storage for 7-day motion-triggered or continuous video/audio recording with:

  • 640 x 480 video resolution;
  • 3 frames/s;
  • 7-day retention; can be upgraded to up to one year.
  • Share or publish cameras, access recorded files.
Download Solution Manual in PDF format
Download Quick Start Guide in PDF format

Cloud CCTV NVR - MT100X / CT100X Bundled Solution is an all-inclusive Cloud NVR & CCTV solution. It integrates a NVR tablet running CameraFTP VSS software, three D-Link DCS-932L / 934L (one of the most popular IP camera models) and one TP-Link Wireless-N 300Mbps Access Point with CameraFTP's Cloud recording and surveillance service.

The cameras are pre-configured to connect with the NVR tablet via the Wireless AP. The VSS software on the NVR tablet encodes the video stream into highly efficient H.264-based video clips and uploads them to CameraFTP cloud.

The bundled cameras and cloud service plan are carefully chosen to strike a balance among video quality, bandwidth usage, hardware cost and service price. It does not offer top quality video / image resolution (which could make your Internet connection painfully slow). At 640x480, it is more than sufficient for monitoring your front door, living room, garage, drive way or backyard. The advantage is it uses less than 160Kbps of upload bandwidth per camera at peak time. The average bandwidth is significantly smaller. Therefore, it is unlikely to affect your Internet connection speed even if you use slow ADSL. Many other cameras require much more bandwidth, and if you have multiple such cameras, they will compete for bandwidth with your other devices, resulting slow and unreliable connection.

By default, our Bundled Solutions offer unlimited cloud storage for storing up to 7-days of footage. For longer retention days, please contact CameraFTP support.

A complete Cloud NVR/CCTV Solution that works out of the box;
Supports Wi-Fi, no network / video cabling is required;
Includes unlimited video cloud storage, no local storage is required;
Your recorded data cannot be destroyed by any intruders;
Live view or playback from anywhere on any devices.
Includes a NVR tablet PC with CameraFTP's VSS software for:
Uploading H.264 video clips to the Cloud;
CCTV-style live viewing;
Includes a dedicated wireless router delivering superior security and signal strength.

Since it is a pre-configured solution, it works out of the box. Please note that Broadband Internet Connection is required.

Start Recording

  • Power on the TP-Link Wireless AP and connect it with your Internet router (such as your broadband modem or wireless AP) using the included Ethernet cable. Please see the diagram below:
  • Power on your D-Link IP cameras. Your IP cameras are pre-configured to connect to the TP-Link Wireless AP and automatically acquire an IP address via DHCP. It might take up to 1 minute. When it is connected to the Internet, the D-Link Camera's power light will turn solid green.
  • Power on your tablet. You need to press and hold the power button until you see the device is booting up, then release the power button. After it boots, it will automatically launch CameraFTP VSS software. During the initial setup, you need to log on to VSS with your CameraFTP username and password. The VSS software will then connect to the IP cameras and display the live view windows.


The VSS software is responsible for encoding the video stream into highly efficient H.264-based MP4 clips and upload them to the cloud. You shall never turn off your NVR tablet or quit VSS unless you really want to stop recording.

Local live-view

You can watch live views on the NVR tablet. The tablet can also connect to an external monitor / TV via Miracast. If your monitor / TV does not support Miracast, you can order a Miracast dongle.

View your cameras from a PC / MAC

Launch a web browser and log on to www.CameraFTP.com, click My Cameras, you will see a list of your cameras. You can click on a camera to view it.

Please note MT100X is pre-configured to upload when a motion is detected. If you don't see any images/videos, please walk before the camera. CameraFTP will buffer the uploaded data for up to 1 minute, so it might take 1 to 2 minutes for the video to show up.

Since these are wireless cameras, you can easily move the cameras and tablet around without needing to redo the cabling.

Live-view and Playback
Web browser-based CameraFTP Viewer - Supports multiple viewers in one screen

View cameras from your iPhone, iPad, Android or Windows Phone devices

Scan the QR code below, or visit the App Store, Google Play store or Windows Store, and then search for "CameraFTP Viewer" to install our viewer app.

Launch the CameraFTP Viewer app, log on to your CameraFTP account. After logon, you can see a list of your cameras. You can select a camera to view it live or play back the recorded footage.

If your camera detects a motion, the system will generate an event. An alert will be sent to your smart phone if you have CameraFTP Viewer app installed. You can also view the events online in the Event Center.


Cloud CCTV NVR - MT100X / CT100X Bundled Solution combines the advantages of a NVR PC with Quad-core Intel CPU and touch screen, D-Link wireless cameras, dedicated TP-Link Wireless AP, CameraFTP VSS software and cloud service, it offers far more features than other DVRs.
Wi-Fi Support Yes
Installation/wiring No video/network wiring required
Local Storage Required No
Cloud Service Required Yes
Night Vision Up to 15 feet
Daily Activity Reports Yes
Live View Yes
Playback Yes
Mobile Viewer App Yes
Share Cameras Yes
Publish Cameras Yes
Embed Cameras in Webpage Yes
Video Recording Yes
Audio Recording No
Can Download Video Files Yes
H.264 Support Yes(H.264 minimizes bandwidth requirements)
IP Camera SPEC
Brand D-Link DCS-932L ( or equivalent )
Wi-Fi Yes
Image/video resolution Preconfigured to 640x480
Night-vision Up to 15 feet
Power Consumption 5W
Operating Temperature 21 - 120 F
Wired Ethernet Yes
Wireless Wi-Fi 802.11 A/C (Dual Band)
Wireless Access Point SPEC
Brand TP-LINK Wireless N300 (or equivalent)
Wireless Type 802.11bgn
Antennal Dual Antennal
Max Wireless Speed 300Mbps
Ports 1 WAN port and 4 LAN ports

CameraFTP Subscription Requirements

CCTV NVR - MT100X / CT100X is a bundled solution. Most features require an active CameraFTP subscription. This being said, the bundled devices are standard devices. It is possible for you to re-configure the devices for other purposes.

If you cancel your CameraFTP subscription, you will no longer qualify for any CameraFTP support. You also need to make sure that your cameras are no longer uploading data to CameraFTP. You can do so by resetting your IP cameras to factory state, or turning the devices off permanently.

Change Your Service Plan

With our pre-configured solution, changing your service plan is generally not supported by CameraFTP. CameraFTP neither recommends nor forbids you from changing your service plan(s) by yourself.

Increase your retention days

By default, the system keeps 7 days of recorded footage. If you want to increase the retention days, you don't need to re-configure your device / software. Please contact CameraFTP customer support first.

Change other service parameters

By default, the system uploads data only when it detected a motion. If you want to upload continuously, or if you want to change any other service parameters, you must order a new service plan, and then cancel your current plan on www.CameraFTP.com. You will then need to re-configure your cameras or VSS software (if the solution includes a tablet).

In general, CameraFTP does not provide technical support on changing your subscription plan that is offered as part of a bundled solution. In certain special cases at our sole discretion, we may offer technical support on service upgrades, provided the customer is experienced in configuring software and digital devices and can effectively work with our tech support staff.

Adding more cameras

You can order more cameras from any vendor. You can then order more camera licenses on www.CameraFTP.com and manually configure the cameras to upload data to CameraFTP directly. It will not affect your existing CameraFTP subscriptions.

If you want to add a camera to CameraFTP VSS, you can do so by manually adding a new IP camera to VSS. You must also order a new camera license on www.CameraFTP.com. Alternatively, you can contact CameraFTP support for more detailed instructions. The recommended maximum number of IP cameras for CCTV NVR - MT100X / CT100X is 5 at the default subscription parameters.

Hardware Warranty

CameraFTP CCTV NVR - MT100X / CT100X is a bundled solution, which is different from a conventional system purchased from a single manufacturer.

CameraFTP does not make any hardware devices; and we had never sold any hardware devices before 2016. In recent years, we have seen more users requesting that we provide bundled hardware as part of our cloud service. Though CameraFTP does not manufacture hardware, we have heeded out customers' wishes by testing our software and service with many devices in the market. After thorough testing, comparison and optimization, we are proud to offer an all-inclusive security system to those users who prefer an integrated and pre-configured solution.

Because CameraFTP does not build the hardware bundled in our solution, these devices carry the standard 1-year warranty from the device's manufacturer. The manufacturer's warranty information is included in the package you receive from CameraFTP.

During the 1st 31 days, CameraFTP will offer replacement and re-configuration for free, provided that:

  • The device stopped working out of normal use;
  • The device was not used for any other purposes;
  • The device's pre-configuration was not changed;
  • The device is kept in good condition and returned in the original box with original accessories.

CameraFTP does not assume any other liability related with the bundled devices.

CameraFTP will continue optimizing the devices that we include in our bundled solutions. We may change certain bundled devices from time to time in order to improve our service quality, add more features or lower the system cost.

Note: Due to availability of hardware, not all bundled devices will be identical, however, the differences will be minor and will not affect the published system SPECs and Features.

Software and Service Warranty

CameraFTP's software and service warranty is covered in our standard Terms and Agreement. Our service has been very reliable in the past. However, for regular users, the service and solution are offered As Is without any warranty.

Hardware Warranty

1. How to check the network connection status

  • On normal operation, the TP-Link AP displays 3 green lights: the power light is solid green, the Wi-Fi light is green, and the Internet connection light is green and flashing. Note: There is a button to turn Wi-Fi on or off at the back of the AP. Please make sure it is on.
  • The D-Link Camera's power light should be green and flashing, indicating it is connected to the network. If only one camera is not connected to the network, you can power it off and then power it on. If none of your cameras are connected, you need to restart the AP.
  • To check the network connection status of the Windows tablet, you need to swipe on the screen from the right edge; it will then display the Charms Bar. You can then see your network connection status. Alternatively, you can tap on the Start button to go to the Start Screen, then tap on the Settings tile, which will open the PC Settings window. Tap on Network, you will see your connection status.

If the NVR tablet is not connected to the network, but cameras are connected to the network, you need to restart the tablet. If neither the tablet nor cameras are connected to the network, then you need to restart the TP-link AP.

2. The live view does not work on the included tablet.

  • Make sure your tablet is connected to the included TP-Link AP. If your tablet is far away from the AP, the connection may become unreliable. Move the NVR tablet closer to the AP.
  • Make sure your cameras are connected to the included TP-Link AP. If a camera is far away from the AP, you need to adjust the location of the camera(s) and the AP. If your house is very large or if it has thick walls, the Wi-Fi signal may become too weak. In this case, you can use a range extender or directly connect the cameras with the AP using an Ethernet cable.

3. I can see the live views on the included tablet, but it does not upload any video to the cloud.

  • The system is configured to upload only when it detects a motion. Please make sure there were some activities in the scene. The system may buffer the data for up to 1 or 2 minutes.
  • Make sure the NVR tablet is connected to the Internet. You can launch a web browser on the tablet. If you can access www.CameraFTP.com, then you are connected to the Internet. In this case, please log on to your CameraFTP account and see if your account has any problems (e.g.: negative account balance; exceeding usage/license limit, etc.)

4. Camera live view worked fine before, but now it is unstable on the NVR tablet.

If it worked fine before, you might want to reboot the affected devices. To reboot the wireless AP and IP cameras, you just need to disconnect the power adaptor, and reconnect it after 10 seconds. If it does not solve the problem, you can restart CameraFTP VSS software, or reboot the Windows tablet.

5. Please do not turn off the CCTV NVR tablet

The CameraFTP VSS software is responsible for encoding the video stream into highly efficient H.264-based MP4 clips and upload them to the cloud. You shall never power off the tablet or quit VSS unless you really want to stop recording.

6. Please make sure your CameraFTP account is in good standing

You must make sure that your CameraFTP account is in good standing. If you cancel your subscription, the service will stop working. Please also make sure that you pay your service fees on time. You can setup automatic debiting, or pay annually.